Ampetronic
ILD100 Small Area VOX Switching Audio Induction Loop Driver 3.4Arms for areas up to 200m sq
Product ID: ILD100
Brand: Ampetronic
Description
Ampetronic
ILD100 Small Area VOX Switching Audio Induction Loop Driver 3.4Arms for areas up to 200m2
The ILD100 audio induction loop driver is in a class of its own. This compact and stylish unit is capable of driving loop areas in excess of 100m2 with an unrivalled clarity of sound for superior intelligibility. Based on proven and highly reliable technology it is backed by a full 5 year warranty and free technical support.All connections are plug and socket style for simple quick installation. Configuration VOX switching sets priorities for each input e.g. emergency annoouncements can override other auio inputs. Twin phono (RCA) inputs provide a simple interface to hi-fi systems and televisions. Available with a range of microphones, interface cables and accessories.Freestanding or wall mounted, the ILD100 is the obvious choice for smaller installations such as TV loop systems, private home loops, video conference rooms, nursing homes, reception and waiting rooms area loops.
Features
- Area coverage to >200m2
- Low lifetime cost
- Excellent proven reliability
- 5 year warranty
- Unrivalled intelligibility
- VOX switching – configured to prioritise Mic 1 input
- Built in tone control
- Very compact – 216 x 124 x 44mm
- 2 microphone inputs (electret)
- 1 line input – twin phono (RCA) connectors for TV / hi-fi connection
- Input adaptors and accessories for any audio input requirements,
e.g. SCART lead, assorted microphones - Free technical support line for advice, design and install
Applications include
- Video conference facilities
- Meeting rooms
- Small seminar rooms
- Television rooms
- Nursing homes
- Private homes
- Receptions and waiting rooms
- Handbook and installation instructions
- 99 x 128mm loop system present sign (deaf logo)
- Region specific mains cable
- 1 microphone (see options table)
- 1 SCART to phono cable
Ashton Audio can supply an extensive range of additional accessories for installation – discuss your requirements with our sales team and we will provide materials and equipment to suit your application.
Compatible Microphone options
The ILD100 can be purchased as a stand-alone unit or with microphones. If you require additional options, please contact Support for specification or supply of a microphone to suit your application.Tie clip microphone EM1.2: Diameter 10 x 18mm long, supplied with tie clip (crocodile clip) and 3m cable.
Desktop microphone EM195A: Footprint 93 x 76mm. Directional microphone for improved sound pickup. Weighted base for stability. Mounted on horizontal or vertical surface (mounting accessories supplied). 3m cable.
Boundary microphone Q400: AKG manufactured hypercardioid boundary microphone 43 x 23mm footprint. Can be fixed to any flat surface. 3m cable.
Desktop microphone EM195A: Footprint 93 x 76mm. Directional microphone for improved sound pickup. Weighted base for stability. Mounted on horizontal or vertical surface (mounting accessories supplied). 3m cable.
Boundary microphone Q400: AKG manufactured hypercardioid boundary microphone 43 x 23mm footprint. Can be fixed to any flat surface. 3m cable.
Compatible Input adaptors and preamplifiers
By using the appropriate input adaptor or preamplifier the ILD100 will accept multiple additional inputs or audio inputs from other sources:MAT60 - Balanced dynamic microphone (XLR)
MAT60 + 15V PSU - Balanced capacitor 15V phantom power microphone (XLR)
ATT-UJ & ATT-UX transformer isolated attenuators - 100V line input. Low impedance speaker line. Line LevelStandards complianceThe ILD100 is CE marked to all relevant safety and EMC standards.
All Ampetronic amplifiers can be used to create a sytem that meets the requirement of IEC118-4 and the relevant recommendation of BS7594. However, the design and installation of the system is equally important to meet these Induction Loop standards.
MAT60 + 15V PSU - Balanced capacitor 15V phantom power microphone (XLR)
ATT-UJ & ATT-UX transformer isolated attenuators - 100V line input. Low impedance speaker line. Line LevelStandards complianceThe ILD100 is CE marked to all relevant safety and EMC standards.
All Ampetronic amplifiers can be used to create a sytem that meets the requirement of IEC118-4 and the relevant recommendation of BS7594. However, the design and installation of the system is equally important to meet these Induction Loop standards.
Perimeter Loops – Area Coverage (maximum)
The ILD100 is designed for perimeter loop applications.
Room aspect ratio | 1:1 | 2:1 | 3:1 |
Maximum area coverage m2 | 120 | 150 | 200 |
For any Induction Loop System, area coverage is dependent on several factors. Please check these assumptions and contact Ampetronic for advice if required:
The loop is 1-2m above or below the receiver height
There are no metal structures in the plane of the loop
There is sufficient voltage to drive the cable length – check table below.
Maximum Cable Length
The ILD100 is designed for SINGLE TURN loops for optimum audio quality. When maximum current output is required the ILD100 can drive
Loops with DC resistance from 0.2Ω to 0.8Ω
Impedance up to a maximum of 0.9Ω
When operating below maximum outpuit, the ILD100 can drive longer cable lengths - contacts us for more details.
Maximum cable length is dependent on cable type and on the application.
Cable type | Maximum Cable Length (m) | |
Normal Use* | Transient Speech* | |
1.0mm2 copper | 34 | 39 |
2.5mm2 copper | 40 | 49 |
4.0mm2 copper | 46 | 59 |
1.8mm2 flat copper tape | 60 | 70 |
* Short term speech (e.g. service counter, airport PA system) can cope with limited clipping at high frequencies – Ampetronic recommends delivery of full current up to 1.2kHz for these applications.
Longer term usage or signals with music or high quality audio must deliver full current to at least 1.6kHz to prevent fatigue and give acceptable intelligibility. Many commercially available systems do not deliver sufficient voltage to reproduce critical high frequencies – ask us for more details.
Longer term usage or signals with music or high quality audio must deliver full current to at least 1.6kHz to prevent fatigue and give acceptable intelligibility. Many commercially available systems do not deliver sufficient voltage to reproduce critical high frequencies – ask us for more details.
ILD100 Specifications
INPUTS
| Power | 15W 230V AC nominal, 45-65Hz 120V and 12V DC options also available Power switch and LED indicator on front panel |
| Microphone input | 2 inputs: 3.5mm mono connector for electret microphones DC powering for electret capsules. (Requires MAT60 adaptor to take XLR balanced microphone input). Front panel recessed gain control |
| Line input | 2 x phono (RCA) connectors, impedance 60kΩ each side, 20kΩ differential. Sensitivity matched to?SCART signal level. Front panel recessed gain control |
OUTPUTS
| Drive voltage | 3.0Vrms (4.2Vpk) at maximum output current |
| Drive current | • 3.4Arms (4.8Apk) continuous 1kHz sine wave • Short term peaks. 6.5A • Front panel recess drive control • Front panel LED indicates current peaks |
| Loop connector | Lever cable clamp |
AUDIO SYSTEM
| Freq. response | 80Hz to 6.5kHz |
| Automatic Gain Control | The AGC is optimised for speech. Dynamic range >36dB Front panel recessed input level control |
| Tone control | Front panel recessed control |
ADDITIONAL FUNCTIONS
| VOX switching | To control prioritisation of microphone 1 input. 4 different actions when microphone 1 level is at the onset of compression. Options to attenuate or turn off other inputs when microphone 1 is active, and to turn microphone 1 off when below threshold if required. |
| Cooling | Cooling is by natural convection from the product casing. |
PHYSICAL
| Dimensions | Width 124mm Depth 216mm Height 44mm |
| Mounting options | • Freestanding • Wall mounting – mounting holes provided on rear panel |
| Weight | 1.3kg |
| Environment | IP20 protection; 20 to 90% relative humidity; 0 to 35ºC |
Ashton Audio in conjunction with Ampetronic can design your induction loop system for you. Simple induction loop designs are free, complex array systems will be charged for at a nominal rate. You can request a design through our 'Contact Us' Enquiry Form.
